|
Joined: May 2005
Posts: 9,611
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: May 2005
Posts: 9,611 |
I have some TTSX 200gr bullets loaded for my .358. I have then loaded as long as I can...around 2.85. Am I wasting my time or should I take them down .10,.20,or .50 to start with? All of my other rifles I load kissing the lands but I know the Barnes bullets are a little different. powdr
|
|
|
|
Joined: Mar 2006
Posts: 3,237
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2006
Posts: 3,237 |
Barnes recommends starting at 0.050" off the lands and adjusting depth from 0.070"-0.030" if the accuracy is not as desired. Pressure may spike if you load to kiss the lands.
molɔ̀ːn labé skýla
|
|
|
|
Joined: Feb 2008
Posts: 5,740 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2008
Posts: 5,740 Likes: 1 |
I have solved almost fifty rifles now for Barnes bullets. I hate doing it.
I start out with a given Rifle with a book length load and work up the powder charge to near max and look for an improvement n accuracy to tell me what charge it likes. If the groups are an nch or less I'm done. If they're more than two inches I bump the seating depth up to .010 off and start working back .010 at a tme until I find improved accuracy. At that point I refine the charge and usually that's it.
|
|
|
|
Joined: Sep 2009
Posts: 46,296 Likes: 6
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2009
Posts: 46,296 Likes: 6 |
2.695" gets me excellent accuracy with both TSX/TTSX in my 358W Ruger Hawkeye, I use H-322 with the TSX's and RL-7 for the TTSX's, both bullets chrono at 2700 fps, HELLUVA efficient little round and one of my favorites.
Gunner
Trump Won!
|
|
|
|
Joined: Oct 2009
Posts: 1,742
Campfire Regular
|
Campfire Regular
Joined: Oct 2009
Posts: 1,742 |
I've only worked up a few rifles for ttsx but they all have .050" jump. All are very accurate. Ttsx is usually more bullet than I need but man do they shoot.
|
|
|
|
Joined: Oct 2007
Posts: 1,267
Campfire Regular
|
Campfire Regular
Joined: Oct 2007
Posts: 1,267 |
Almost all of my loads with the ttsx shoot best when seated .070 to .080 off the lands.
|
|
|
|
Joined: Nov 2005
Posts: 6,170
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2005
Posts: 6,170 |
I have had pretty good luck with something like Miles plan, I typically run my first set at .050 off to find the best powder charge. If I need more accuracy I take the best powder charge and either start at .010 or mag length and work back in roughly .020 increments.
I realize that going from .050 to .010 might increase pressure, but it hasn't been an issue yet for me. In fact that original .050 has worked well in more than one case.
So far I have had pretty fair luck with TTSX's, from good (1") to stellar (.5" or less) 5 shot groups, but one rifle just didn't seem to agree with them. I like TTSX's but not fixed on them, If I can't find promise in a box of bullets I will look at a different weight or switch bullets.
The collection of taxes which are not absolutely required, which do not beyond reasonable doubt contribute to public welfare, is only a species of legalized larceny. Under this Republic the rewards of industry belong to those who earn them. Coolidge
|
|
|
|
Joined: Mar 2002
Posts: 9,131
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2002
Posts: 9,131 |
.040 works great in my 300's they never did shoot well close to the lands!
|
|
|
|
Joined: Feb 2011
Posts: 6,314
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2011
Posts: 6,314 |
I typically load a few close (if not kissing) to the lands. I run them over the chrony to check pressure/velocity. If I'm where I want to be, I load three at .030" off, 3 at .050" off and 3 at .070" off. For some reason, I always shoot the .050" off loads on paper first. Then the .070", then the .030". Just a routine I follow... Usually, I find something with those 9 shots that looks promising. If I feel like tinkering more, I adjust accordingly based on what the first three groups showed. I did this exact thing earlier today with a 243, 85TSX and 46.5grs of Hunter. The rifle was sighted in for the 90gr Deep Curl load I'd developed for my daughter. First three at .050" off...they were low and to the right. Adjusted the scope (not enough) and shot the .070" off loads... Let things cool down and shot the .030" off group... I'm done. Three clicks to the left and I'll verify zero again after the wind settles down tonight. I'll bust some steel tomorrow afternoon at 300 yards to verify the load and hopefully load development is complete. Barnes are very sensitive to seating depth and this is a perfect example. I've never had great success with them really close to the lands, but have found sweet spots as far as .130" off. Not super scientific, but I can usually find a good load in less than 20 rounds.
I enjoy handguns and I really like shotguns,...but I love rifles!
|
|
|
|
Joined: Feb 2009
Posts: 1,808 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Feb 2009
Posts: 1,808 Likes: 2 |
I'm limited by the inside length of the magazine box in my .300 Weatherby.
SAVE 200 ELK, KILL A WOLF
NRA Endowment Life Member
|
|
|
|
Joined: Jul 2005
Posts: 798
Campfire Regular
|
Campfire Regular
Joined: Jul 2005
Posts: 798 |
Unlike most of the posters that have responded, I start all Barnes bullets at kissing the lands and work shorter by .005 in 3 shot groups for hunting rifles. Usually most rifles I shoot them in will shoot accurately somewhere between -.010 and .020. I have tried the other method without success so I started treating them just like cup and core bullets and it has worked for me. Calibers I have tried, 243,25,26,27,28,30 and 375 and all follow the same pattern and all shoot great between -.010 and -.020. I have found that most TTSX bullets like to run near the upper end of the velocity range. Bill
|
|
|
|
Joined: Aug 2008
Posts: 2,259
Campfire Regular
|
Campfire Regular
Joined: Aug 2008
Posts: 2,259 |
I start at .050" as recommended by Barnes then try .020", 0.080", and 0.110" if the others don't work. So far, every load I've kept has been at .050" except one. In my ULA .260 I had slightly more consistent results at .080" off.
RLTW
|
|
|
|
Joined: Nov 2005
Posts: 189
Campfire Member
|
Campfire Member
Joined: Nov 2005
Posts: 189 |
I seat at the bottom of the first groove and have had great results in 4 rifles.
|
|
|
|
Joined: Sep 2007
Posts: 4,858
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2007
Posts: 4,858 |
I seat at the bottom of the first groove and have had great results in 4 rifles. works for me too most times...they likes to jump!
|
|
|
|
Joined: May 2004
Posts: 10,883 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2004
Posts: 10,883 Likes: 1 |
55 thousandths off in my Ruger .308.
|
|
|
|
Joined: Dec 2003
Posts: 4,057
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2003
Posts: 4,057 |
So far I have seated them almost kissing the lands on four different rifles , and not had a problem. Accuracy was good with all four
"Before you criticize someone, walk a mile in their shoes. That way, you'll be a mile from them, and you'll have their shoes."
|
|
|
|
Joined: May 2005
Posts: 9,611
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: May 2005
Posts: 9,611 |
Thanks guys I'm about .05 off now and will shoot 3 and take the others down to .20,.30, and .50 off the lands. I have 12 loaded up and enough to load another whole box. Will report what I find. Thanks again. powdr
|
|
|
|
Joined: Oct 2008
Posts: 8,748
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2008
Posts: 8,748 |
Has not mattered for me. .050" worked real well in one rifle, then due to mag limits I was .150" off on another and it is the most accurate load I have in that rifle.
|
|
|
|
Joined: Mar 2004
Posts: 632
Campfire Regular
|
Campfire Regular
Joined: Mar 2004
Posts: 632 |
I pretty much use TTSX for all my rifles. I have loaded them from .010 to as much as .095 to get them to shoot. By looking at my data it seems like the bigger the caliber the farther from the lands I have to seat them to get them to shoot.
|
|
|
|
Joined: Feb 2008
Posts: 1,491
Campfire Regular
|
Campfire Regular
Joined: Feb 2008
Posts: 1,491 |
I've always gotten a laff at 'web experts' claiming the BR technique of seating at or slightly into the lands obtains best accuracy. In fact, I get laffs at any such supposed simplistic accuracy 'expert tips'. There's only one thing we can be sure of and it's that self appointed experts ain't, no matter how many gun magazine articals or reloading web posts they've read.
|
|
|
|
530 members (160user, 12344mag, 10gaugeman, 117LBS, 1234, 06hunter59, 56 invisible),
2,722
guests, and
1,248
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,793
Posts18,536,393
Members74,041
|
Most Online11,491 Jul 7th, 2023
|
|
|
|